-
The YPK three-bladed straight-paddle impeller is a radial flow impeller. When a baffle is present, it creates an up-and-down circulating flow. It generally operates under transitional flow conditions.
-
The ZCX three-blade propeller is a widely used axial flow impeller with good discharge performance and low shear force. It is suitable for mixing, dissolving, reacting, crystallizing, mass transfer, extraction, and other operations with medium to low viscosity.
-
The KCX three-blade propeller is an axial flow type impeller. Its shear rate adapts to a wide range of sugar content. The curved blade surface creates good axial flow, resulting in a large discharge circulation flow.
-
The ZSX four-narrow-blade propeller-type impeller is an axial flow impeller. The conical curved blades give this impeller type very low shear force and high turbulent diffusion capacity, similar to the KSX power performance, and it is especially suitable for mass transfer and solid suspension.
-
The KSX four-wide-blade helical impeller is an axial flow impeller. Its bent curved blades give it very low shear force and high turbulent diffusion capacity.
-
The YKK three-blade open turbine impeller is a comprehensive impeller with lower resistance than the YK impeller and strong dispersion capabilities.
-
The BM three-blade Rushton turbine impeller is a radial flow impeller with large-width blades and a rearward angle at the blade tip.
-
The SJ variable-section folded blade impeller is an axial flow impeller. At low speeds, it exhibits horizontal circumferential flow and axial flow, while at high speeds, it exhibits radial flow and axial flow.
