-
The CJ variable-section folding blade is an axial-flow blade. Two small blades are installed at the front end of the main blade, opposite to the inclination direction of the main blade.
-
The FCK four-curved blade open turbine type impeller is a radial flow impeller with arc-shaped curved blades and a large backward angle. It has a large discharge, low power consumption, low shear force, and the blades are not easily worn.
-
The HQ three-leaf backward-inclined impeller is a radial flow impeller. Due to the effect of the backward angle of the blades, the radial vortex generated is relatively small.
-
The HW three-blade swept-back impeller is a radial flow impeller with curved blades and a large backward angle. It features high throughput, low power consumption, and low shear force.
-
A PK/PCK six-blade straight-blade turbine impeller, a radial flow impeller with high turbulent diffusion and shear force. When baffles are used, it can form an up-and-down circulating flow, with a wide range of operating speeds and viscosities.
-
The KS frame impeller is a low-speed radial flow impeller. Stirring is mainly characterized by horizontal annular flow, and the horizontal and vertical bars at different positions can increase the eddy current near the blades and expand the stirring range.
-
The KSG scraper-type agitator is a low-speed, radial-flow impeller. Fixed or movable scrapers are arranged on the frame edge. Under the action of material resistance
-
The ZSX double-wide blade helical propeller is an axial flow impeller. The helical conical curved blades give this impeller type very low shear force and high turbulent diffusion capacity.